Product Overview
C1800FDi
DSP 2 x 950 w power amplifier for fixed install applications
- Professional DSP amplifier for live and mobile application
- Fully integrated professional speaker processing with FIR drive technology
- Market-leading acoustic performance and rock solid reliability
- Intuitive, simplified set-up, control and operation in SONICUE sound system software with firmware 2.0
Dynacord C Series amplifiers are dedicated installation DSP amplifiers optimized for 24/7 operation. Integrated digital signal procesing provides access to professional speaker processing with FIR Drive technology. C Series amplifier utilize Class A/B resp. Class H topologies, which provide market leading acoustic performance and reliability. The connectivity is optimized for the needs of fixed install applications. For low cost of ownership a power saving standby mode is available. A front panel LC display allows local control and supervision of the amplifier. An intuitive system control software allows fast system setup, flexible system control and comprehensive supervision.
| Load Impedance | 2 Ω | 2.6 Ω | 4 Ω | 8 Ω |
| Maximum Output Power, Single Channel | 1600 W | 1300 W | 950 W | 480 W |
| Maximum Output Power, Dual Channel | 1400 W | 1200 W | 850 W | 450 W |
| Maximum Output Power, Bridged | - | - | 2800 W | 1700 W |
| Direct Drive Load Capability Dual Channel Bridged | 70 V Operation 2 x 1250 W (-1.5 dB) Not recommended1 | 100 V Operation Not available2 1 x 1250 W (-1.5 dB) |
| Maximum RMS Voltage Swing THD = 1%, 1 kHz | 65.1 V |
| Voltage Gain Ref.1 kHz | 32.0 dB |
| THD at 600 W/4 ΩMBW = 80 kHz, 1kHz | < 0.05% |
| IMD-SMPTE, 60 Hz, 7 kHz | < 0.1% |
| DIM30, 3.15 kHz, 15 kHz | < 0.05% |
| Maximum Input Level | +21 dBu |
| Crosstalk ref. 1 kHz, at 100W/4 Ω | < -80 dB |
| Frequency Response, ref. 1 kHz | Frequency Response, ref. 1 kHz |
| Frequency Response, ref. 1 kHz | 20 k Ω |
| Signal to Noise Ratio Amplifier, A-weighted, ref to Max. Output Power@ 8 Ω | >105 dB |
| Output Noise, A-weighted | < -68 dBu |
| Output Stage Topology | Class AB |
| Power Requirements | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) |
| Power Consumption â…› Maximum Output Power @ 4 Ω | 700 W |
| Mains Fuse | 240 V/230 V: T12AH; 120 V/100 V: T25AH |
| Protection | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, In rush current limiters, Turn on delay |
| Cooling | Front-to-rear, 3-stage-fans |
| Ambient Temperature Limits | +5°C to +40°C (40°F to +105°F) |
| Safety Class | I |
| Color | Black |
| Dimensions (W x H x D), mm | 483 x 88 x 462.4 |
| Weight | 15.2 kg (33.5 lb) |
| Remote Power ON/GPIO | Power remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection |
| Signal Processing | FIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance |
| Remote Control | SONICUE sound system software ** |
| Accessories | RMK15 (rear rack mount kit) |
