null

C1300FDI-US

(No reviews yet) Write a Review

Call 412-430-0430 for Pricing

SKU:
F.01U.314.183

Product Overview

C1300FDi

DSP 2 x 650 w power amplifier for fixed install applications

  • Professional DSP amplifier for live and mobile application
  • Fully integrated professional speaker processing with FIR drive technology
  • Market-leading acoustic performance and rock solid reliability
  • Intuitive, simplified set-up, control and operation in SONICUE sound system software with firmware 2.0

Dynacord C Series amplifiers are dedicated installation DSP amplifiers optimized for 24/7 operation. Integrated digital signal procesing provides access to professional speaker processing with FIR Drive technology. C Series amplifier utilize Class A/B resp. Class H topologies, which provide market leading acoustic performance and reliability. The connectivity is optimized for the needs of fixed install applications. For low cost of ownership a power saving standby mode is available. A front panel LC display allows local control and supervision of the amplifier. An intuitive system control software allows fast system setup, flexible system control and comprehensive supervision.

Load Impedance2 Ω2.6 Ω4 Ω8 Ω
Maximum Output Power, Single Channel1100 W950 W660 W350 W
Maximum Output Power, Dual Channel1000 W850 W600 W320 W
Maximum Output Power, Bridged--2000 W1200 W
Direct Drive
Load Capability
Dual Channel Bridged
70 V Operation
Not available2
1 x 625 W (0.0 dB)
100 V Operation
Not available2
Not available2
Maximum RMS Voltage Swing
THD = 1%, 1 kHz
55.3 V
Voltage Gain Ref.1 kHz32.0 dB
THD at 450 W/4Ω MBW = 80 kHz, 1kHz< 0.05%
IMD-SMPTE, 60 Hz, 7 kHz< 0.1%
DIM30, 3.15 kHz, 15 kHz< 0.05%
Maximum Input Level+21 dBu
Crosstalk ref. 1 kHz, at 100W/4 Ω< -80 dB
Frequency Response, ref. 1 kHz10 Hz to 21 kHz (±1 dB)
Input Impedance, Active Balanced20 k Ω
Signal to Noise Ratio Amplifier, A-weighted, ref to Max. Output Power@ 8 Ω>104 dB
Output Noise, A-weighted< -68 dBu
Output Stage TopologyClass AB
Power Requirements240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
Power Consumption â…› Maximum Output Power @ 4 Ω550 W
Mains Fuse240 V/230 V: T10AH; 120 V/100 V: T20AH
ProtectionAudio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
CoolingFront-to-rear, 3-stage-fans
Ambient Temperature Limits+5°C to +40°C (40°F to +105°F)
Safety ClassI
ColorBlack
Dimensions (W x H x D), mm483 x 88 x 462.4
Weight12.9 kg (28.4 lb)
Remote Power ON/GPIOPower remote via switch, delay time selectable Floating relay contacts (show protect mode) Inputs for preset selection
Signal ProcessingFIR filters, audio limiters, output and array** delay, 10-band** user PEQ, 5-band array PEQ** per channel, load impedance
Remote ControlSONICUE sound system software **
AccessoriesRMK15 (rear rack mount kit)

Reviews

(No reviews yet) Write a Review