Remote Air 4 Single-Channel Wireless Follow Focus System w/Hand Controller

PD2-M3-A

The Remote Air 4 Dual Motor Wireless Lens Control Kit is in the PD Movie family of wireless lens controllers and motors. It includes a single wireless receiving motor two daisy-chainable wired motors, and it comes with a Wi-Fi controller with a 328′ range. The system supports 19 channels, so you can find clean communication between controller and motor, even when using multiple motors in a FIZ (focus, iris, zoom) setup.

Included in this kit are a wireless receiver motor and a wired motor. Both motors feature a cine-style drive gear with 0.8 MOD and can drive either focus, iris, or zoom on a lens with cine-style gears. The wireless motor has a built-in wireless antenna and power port, while the wired motor is daisy-chainable with the wireless motor, allowing you to control both motors with a single transmitter. The calibration procedure has been simplified and you can calibrate lenses with or without hard stops. Built-in OLED screens on the motor and handwheel provide clear information on the state of your system. The motor is designed and built in Germany

BLUETOOTH 4.0 CONNECTIVITY

The controller adds the master and slave mode, brand new design for motor and perfect function. A new configuration of REMOTE AIR 4 solves all focus problems that you meet during the filming, it is more comprehensive, convenient and saving time.

RIGHT AND LEFT-HAND CONTROL

The Remote Air 4 controller includes a function that allows the operator to change the orientation of the hand wheel at any time. This means maintaining accurate control whether you are left- or right-handed, and regardless of your orientation to the camera.

100M TRANSMISSION DISTANCE

The Remote Air 4 utilizes 2.4G wireless technology and full duplex signal transmission to transmit and receive data remarkably quickly. While movement is registered on the controller, the motor is simultaneously transmitting position data to accurately reflect movement and positioning in a fraction of a second. Anti-interference and error correction functions are in place to keep controllers and motors connected and communicating at a distance of up to 100m.

ALL FUNCTIONS IN ONE BUTTON

The Remote Air 4 motor allows you to easily access all of the functions with only one button. You can calibrate your lens manually or automatically; adjust the lens speed to slow medium or fast; change the motor direction; cancel the calibration; and recover the calibration.

LONG BATTERY LIFE

The Remote Air 4 controller has an integrated, high-capacity battery that can last up to 30 hours. If you need more, you can charge and power the unit using any standard 5v USB power bank.

COMPATIBLE WITH VARIOUS TYPES OF LENSES

Whether it is a professional film lens or an SLR camera lens, REMOTE AIR 4 running quickly and fluently.

7~20V INPUT VOLTAGE SUPPORT

The motor is designed to be powered using an included D-Tap to 6-pin power cable. In this 4th-generation version, the motor supports a much more expanded 7-20V power input range. This means that you can connect it even to 7.2V DV batteries that have a D-Tap port. Such DV batteries are already available on the market.

FOR 2D AND 3D SHOOTING

The Remote Air 4 can control up to three motors by itself, but can also be adapted for 3D shooting by assigning multiple motors to the same channel.