Product Overview
- Overview
- Specifications
Model: ES220
- Material: Carbon Fiber
- Length: 86.6″
- Payload: 13.2 lbs.
- Net Weight: 12.3 lbs.
- Travel Length: 78.7″
- Converts from 80cm Slider to 150cm or 220cm Slider
- Includes Extra Outrigger Legs for Center Support when at Full Length
- Latch and Hook Connection Style Eliminates Give at Section Junctions
To change the slider length, remove the shorter drive belt and unhook the end piece. Attach the extension, then re-attach the end piece to the extension. Next, thread the longer drive belt through from the carriage, through the end pieces, and back around to the carriage. Tighten the belt, and the slider is now nearly twice as long as before!
The ES220 can mount to 1/4-20 and 3/8-16 screws on the center cheese plate when in 80cm mode, and can mount to 1/4-20 and 3/8-16 screws or to a 5/8″ baby pin stand mount on the end pieces in any configuration. The carriage has a 3/8-16 screw for mounting large cameras or fluid video tripod heads with a flat base.
The end-piece is compatible with both the handwheel (included) or the E-Image Motor1 (not included).
Shipping Dimensions (in):Â 41 x 10 x 11
1 x 117.5" S3M Drive Belt
1 x 2mm Allen Wrench (For Handwheel)
1 x 3mm Allen Wrench (For Drive Belt)
1 x 61" S3M Drive Belt
1 x Dolly Carriage
1 x End Cap W/ Handwheel Mount
2 x Expansion Rail
1 x Handwheel
1 x Handwheel Handle
1 x Rail Section W/ End Cap And Cheese Plate
1 x Travel Bag W/ Shoulder Strap
4 x Outrigger Leg Sets
Build Material:Â Aluminum and Carbon Fiber
Gearing:Â S3M Belt: 3mm Gear Pitch x 10mm Wide | 2.2mm Thick, Tooth Height 1.14mm
Motor Type:Â E-Image Motor1 Compatible (Not Included)
Mounting System:Â On Carriage: 3/8"-16 | End Caps: 1/4"-20, 3/8"-16, 5/8" Baby Pin | Cheese Plate: 1/4"-20 and 3/8"-16
Payload:Â Recommended Max 13.2 lbs.
