Product Overview
DiGiCo Multichannel Interface
DiGiCo DMI cards are perfect for expanding your console I/O, providing interfaces with industry formats be it Analogue expansion, MADI, Dante, Waves SoundGrid or Calrec’s Hydra 2 Network.
All bases are covered.
DMI-A3232
This card allows S-Series Consoles to connect to the A168 STAGE Stage Rack. Each Ethercon port supports up to 32 I/O, for a total channel count of 64 I/O
DMI-ADC
This card provides 16 analog inputs on 2 x 25 way “D” connectors. The ADC card is a line card only. There is no microphone amplifier or phantom power available. There is no gain control function for these inputs (only digital trim). Maximum input level +22dBu.
DMI-AES
This card provides 16 Inputs (8 pairs) and 16 outputs (8 pairs) on 2 x 25 way “D” connectors. All AES inputs are provided with sample rate conversion (SRC) by default. All AES outputs are synchronized to the mixer system clock.
DMI-AMM
This card offers both the SD-Range and the S-Series consoles 48 channels of automatic microphone mixing which can be used in any console input channel.
DMI-AVIOM
This card provides 16 output channels at 48kHz (with SRC) and Supports Aviom's proprietary A-Net Pro16 protocol. It has 1 Ethercon connection and faceplate DIP switched for Stereo output selection.
DMI-DAC
This card provides 16 analog outputs on 2 x 25 way “D” connectors DAC card is line level only. Maximum output level +22dBu (Digital Full Scale)
DMI-DANTE
This card provides 64 input and 64 output channels at 48KHz and 32 input and 32 output channels at 96KHz. It is provided with Primary and Secondary (backup) Gigabit Ethercon ports for connection to the Dante network.
DMI-DANTE64@96
This card provides 64 inputs and 64 outputs to the Dante network at both 48kHz and 96kHz.
*DMI-HYDRA 2
This card will provide 56 Input and 56 output channels at 48kHz with Primary and Secondary (backup) optical connections.
*DMI-KLANG
This card provides ultra-low latency KLANG immersive processing for up to 16 2-channel mixes with 64 inputs at 48kHz or 96kHz.
DMI-MADI-B
This card can be used to connect a Standard MADI stream (64 channels in and out) at 48KHz or 96KHz or an SD Series DiGiCo Rack with the appropriate connector (D2-Rack, SD-Rack, SD-MINIRack)
DMI-MADI-C
This card can be used to connect another DiGiCo device that uses RJ45 Standard MADI (64 channels in and out) at 48KHz or 96KHz or an SD Series DiGiCo Rack with the appropriate connector (D-Rack, D2-Rack)
DMI-MIC
This card provides 8 microphone preamp inputs on a 1 x 25 way "D" connector. Each channel has individual, low noise gain control and phantom power. User interface is through a normal channel strip on your console. Maximum input level is +22dBu.
*DMI-OPTO
This card allows Optocore audio over a choice of optical connectors.
DMI-WAVES
This card will provide 64 input and 64 output channels at 48kHz or 96kHz to the SoundGrid Network with 2 Ethercon ports.
*This card can only be used in SD series consoles or the Orange Box.
